top of page
Search

Strata Building Bond in NSW: A Guide for Owners Corporations

Writer: Project Intervene - 1300 GUID ME (4843 63)
Project Intervene - 1300 GUID ME (4843 63)
3 days ago
2 min read

Defects in a new strata building often only show up after owners have moved in. The NSW Strata Building Bond and Inspections Scheme exists to make sure there is money set aside to fix them. This guide explains how the strata building bond works and what owners corporations and strata committees should know.


What is the strata building bond?


The scheme sits under the Strata Schemes Management Act 2015 (NSW) and is administered by Building Commission NSW. Before applying for an occupation certificate, the developer must lodge a building bond. The bond is calculated as a percentage of the building contract price, as set by regulation, and is held as security for rectifying defective building work identified in the scheme’s inspection reports. The percentage was 2% when the scheme started, and changes have since been announced, so always confirm the current figure with Building Commission NSW.


How the scheme works, step by step


  • Bond lodgement: the developer registers the project and lodges the bond through the NSW Planning Portal before applying for an occupation certificate.

  • Inspector appointment: within 12 months of the building work being finished, the developer appoints a building inspector.

  • Interim inspection and report: the inspector inspects and reports between 15 and 18 months after the building work is finished.

  • Rectification: the builder should fix the defects identified in the interim report before the final inspection.

  • Final inspection and report: the inspector completes a final inspection and report between 21 and 24 months after the building work is finished.

  • Cost to rectify: any defects from the final report that remain unfixed are costed, and the cost must be agreed or determined.

  • Bond payment and completion: the bond is used to pay for the rectification work, the owners corporation completes the repairs, and any balance is returned to the developer.


What owners corporations should do


  • Give the building inspector access to the common property when requested.

  • Collect and record defects reported by lot owners from the day they move in.

  • Keep track of the scheme’s timeline so the interim and final inspections are not missed.

  • Get independent advice on what the inspection reports mean and whether they capture the defects you know about.


Why independent expert advice matters


The bond is a fixed amount, and the scheme’s reports only cover what the inspector identifies. An independent building defect assessment helps an owners corporation understand the full scope of defects, estimate rectification costs and decide whether the bond is likely to be enough.


At Project Intervene, we assist strata schemes with defect investigations, building compliance assessments and remedial building works across Sydney and NSW. If your building is in the strata building bond process, contact us to discuss your situation.


This article is general information only and is not legal advice. Requirements change, so confirm current details with Building Commission NSW or your legal adviser.

 
 
 

Comments


bottom of page